Remkom LLC manufactures three standard sizes flat-fan nozzles ST series, and also has also started production injector nozzles TR, providing treatment plants with using low-expansion foam.
Features of design:
- angle for top spray fan spraying 110±5 degrees;
- made from special chemically resistant plastic, belonging to class polyoxymethylene, which for wear resistance is second only only ceramics.
- mounting dimensions comply with international standard ISO 10626:199;
- color coding of nozzles according to ISO 10625:2005
Abbreviatura ST (TR) denotes type nozzle. Zatem indicates angle for top spray fan spraying - 110 degrees. Number, following after points, shows capacity nozzle (US. gallon/min), etc.i.e.. number of liquids, passing through nozzle for 1 min for pressure 0,3 MPa. For conversion in «l/min» it is necessary multiply specified capacity on coefficient 4.
For example: ST 110.03 — nozzle standard range with angle for top spray fan 110 degrees and capacity 0,3 gallon/min. (or 1,2 l/min).
For meeting or more wider needs for conditions use, flow rate and other factors offer broad range imported nozzles well-known manufacturers Arag (Italy), Lechler (Germany).