PS Series Seed Treaters-10/5M
The seed treater is a self-propelled machine with electric drive for the main mechanisms and an extended auger.
Technical Specifications
| Parameter | Unit | Value |
|---|---|---|
| Type | - | chamber type |
| Drive | - | electric (380 V) |
| Output per hour of main operating time (for wheat) | t/h | 5,5*/11,6 |
| Treatment completeness | % | 100 ± 20 |
| Mechanical damage to seeds, max | % | 0,5 |
| Increase in seed moisture, max | % | 1,0 |
| Tank capacity, min | l | 120 |
| Operating modes | - | auto / manual |
| Pump type | - | diaphragm |
| Range of flow-rate adjustment for liquid metering systems | l/min | 0...1,5 |
| Discharge height seed | m | 3,6 |
| Operating speed, max | m/min | 3,2 |
| Power consumption, max | kW | 1,7 |
| Weight, max | kg | 300 |
| Overall dimensions: length width height |
mm | 2100 1500 2200 |
*Capacity PS-5M
Advantages:
- extended folding auger;
- all units are mounted on a frame installed on wheels with pneumatic tires;
- the auger is switched between operating and transport positions by a lever;
- the service-water tank is intended for system rinsing and for washing the operator’s hands;
- the feed of seed and working solution into the treatment chamber is synchronized by two sensors installed on the seed hopper;
- the self-propelled drive is controlled by the upper sensor, and the pump drive by the lower one;
- two operating modes: manual and automatic.
Process diagram PS-10:
1 - hopper; 2 - chamber treatment; 3 - channel discharge excess seed; 4 - nozzle; 5 - handwheel adjusting; 6 - screw adjusting; 7 - removable divider flow; 8 - window metering.
More detailed information about the design, operating principle, and settings of the seed treater is available in the PS-10 is available in the Operating Manual .